采用大功率發動機,動力強勁,功率儲備充分;液力傳動,具有良好的動力性能、微動性能,操作簡便活力。懸高安裝的空氣濾清器,保證吸入的空氣潔凈,延長發動機壽命,側面為流線造型的車體結構,寬大的腳踏板,上下車極為方便,上面鋼結構的發動機護罩,結實美觀,后端平衡重采用全新大圓弧曲面造型,色彩鮮明的分色涂飾,整個外形圓潤過渡、無縫貼合,美觀大方。
型號 model | 單位 | CPCD40 | CPCD45 | CPCD50 | ||
額定載荷 load capacity | kg | 4000 | 4500 | 5000 | ||
載荷中心距 load center | mm | 500 | ||||
最大起升高度 lifting hight | mm | 3000 | ||||
自由起升高度 free-lift hight | mm | 150 | ||||
貨叉(長×寬×高) fork size(l×w×t) | mm | 1070 ×150×55 | ||||
門架傾角 Mast obliquity | ° | 6/12 | ||||
最小離地間隙 hold under mast | mm | 160 | ||||
最小轉彎半徑 Turning radius | mm | 2760 | 2800 | |||
行駛速度(滿載/空載) Travel speed(with load/ without load) | Km/h | 9/19/9 | ||||
起升速度(滿載/空載) Lifting speed (with load/ without load) | mm/s | 410/430 | 380/430 | |||
下降速度(滿載 /空載) lowering speed(with load/ without load) | mm/s | 380/340 | ||||
最大牽引力( 滿載) Towing | kN | 22/18 | ||||
最大爬坡度(滿載) Gradeability | % | 20 | 18 | |||
外型尺寸 size | 長 longer | mm | 4170 | 4214 | ||
無貨叉長 No longer Fork | mm | 3060 | 3104 | |||
寬 Width | mm | 1480 | ||||
護頂架高 oevrhead guard hight | mm | 2350 | ||||
門架不起升時高度 closed mast hight | mm | 2245 | ||||
最小直角通道寬度 Min. bracket routeway | mm | 2740 | 2800 | |||
軸距 wheel base | mm | 2000 | ||||
輪距 前輪/后輪 Wheel distance (front/behind) | mm | 1180/1190 | ||||
貨叉調整間距 Fork spacing adjustment | mm | 300-1340 | ||||
制動距離(空載) Stopping distance (Empty) | mm | ≤6(19Km/h) | ||||
輪胎(前/后) Tire(front/Behind) | 300-15-18PR /7.00-12-12PR | |||||
發動機 Engine | 型號 model | LR4B3-G88 | ||||
型式 type | 四缸直列水冷四沖程 | |||||
Water-cooled four-stroke inline four-cylinder | ||||||
缸徑 ×行程 Bore×Trip | mm | 108 ×125 | ||||
總排量 Total displacement | cc | 4580 | ||||
壓縮比 Compression ratio | 17:01 | |||||
功率/轉速 rate power/speed | Kw/rpm | 57/2200 | ||||
最大扭矩/轉速 rate torque/speed | Nm/rpm | 285/1300-1500 | ||||
前懸距 Suspend distance front | mm | 570 | ||||
后懸距 Suspend distance back | mm | 540 | 584 | |||
自重 Total weight | kg | 6190 | 6380 | 6700 |